Chat with us, powered by LiveChat

Jungheinrich ETV: First Reach Truck with Lithium-Ion

Jungheinrich has done it again by introducing the world’s first reach truck with a fully integrated lithium-ion battery. The ETV 216i sit-down moving mast reach truck inspired by the previous ETV 2 series of reach trucks.

ETV 216i Features

  • Fast Lifting & Lowering
  • High Residual Capacities
  • Mast & Fork Tilt
  • 360 Ah Integrated Lithium-ion Battery
  • Adjustable Armrest & Steering wheel
  • Storage Trays & Compartments
  • Color Display

Lithium-Ion Advantages:

  • Fast Charging
  • No battery exchanges
  • Maintenance-free with no odors from electrolyte leakage
  • 5-year battery warranty
  • Longer service life and lower maintenance compared to lead-acid
  • You can interrupt the charge anytime without negative results

Reliability:  The ETV combines a zero maintenance lithium-ion battery and added load stability due to its cabin design and counterweight to increase operator confidence and reduced down-times.

Ergonomics: Operators can work in comfort with the roomy compartment with plenty of legroom. The adjustable armrest and steering wheel position helps to support any operator during long shifts.

Operation: The compact design of the lithium-ion battery gives the operator increased visibility of the forks when lifting at higher heights.

Performance: Increased lifting and lowering speeds than conventional vehicles will increase productivity over time!

Want to learn more about the new Jungheinrich ETV 216i sit-down moving mast reach truck with fully integrated lithium-ion battery? Contact us for more information!

Leave a comment

When to Replace Forklift Tires

It is important for every operation to know when to replace their forklift tires and what signs indicate the need for new tires. If they are replaced too soon, you are not getting your money’s worth and decreasing operational profitability. However, replacing forklift tires after the wear limit will result in any of the following:

  • Operators noticing lower speeds and reduced ride comfort
  • Increase in maintenance costs
  • A lower ground clearance and reduced lifting height on the forklift
  • Loss of load capacity, causing accelerated wear and overheating

Variety of Forklift Tires

The first reference to look at when looking to replace lift truck tires is the forklift tire operator’s manual, provided by your forklift tire manufacturer. This is a helpful tool that covers wear limits and the proper time to change your tires. Along with following the manual, there are additional signs that show when it is time to replace old forklift tires.

Wear Indicator Bar

There is a significant amount of forklift tires that come with a wear bar molded into the tire’s sidewall. This indicator becomes visible as the rubber tread wears out – a clear sign that your forklift tires need to be replaced.

Manufacturer Name

Looking for a quick eyeball test to determine if tire replacement is needed? Most tires have the name of the manufacturer molded into the sidewall. Generally speaking, when the tire wears to the top of the nameplate, it should be replaced.

Tire Deformities

A forklift tire needs to be replaced when there are unusual appearances on your tire. These appearances include:

  • Chunking & Tearing – When pieces of the forklift tire are falling off or there are parts tearing.
  • Splits or Cracks – When radial splits or cracks appear on the sidewall of the tire.
  • Non-Round Spots – When flat spots appear on the forklift tire.

Not 100% sure that your tires need replaced? Contact Fallsway today for a free forklift tire inspection by a forklift expert.

So your forklift tires do need replaced…

Next, you need to choose the right type of forklift tire for your machine. Learn what you need to consider when deciding what type of forklift tire suits your application and needs.

Originally published 10/1/2018
Updated 5/16/2019

2 Comments

Fallsway Wins MHEDA MVP Award: 7th Straight Year!

Fallsway Equipment has been awarded the prestigious MVP (Most Valuable Partner) Award for 2019, based on their accomplishments in 2018.  This is the seventh time Fallsway Equipment has earned an MVP Award from the industry’s trade association, MHEDA (Material Handling Equipment Distributors Association).

Award recipients must satisfy a rigorous set of criteria with less than 10% of the association’s membership earning the award.   As a 2019 MVP, Fallsway Equipment has successfully demonstrated a commitment to business excellence, professionalism, and good stewardship.

To qualify for the annual MVP Award companies are required to provide evidence of their commitment to their partners in business including their customers, employees, and suppliers.  They must satisfy criteria in the following important areas:

  • Industry Advocacy
  • Customer Service & Safety Practices
  • Business Networking
  • Continuing Education
  • Business Best Practices

Fallsway equipment is a family owned company that has been in the business since 1959.  We have  160 employees working between our Akron headquarters and Youngstown branch. 

The Material Handling Equipment Distributors Association (MHEDA) is the only national trade association dedicated solely to improving the proficiency of the independent material handling distributor.  MHEDA represents close 650 companies in the material handling equipment business.  Located in suburban Chicago, the association provides services to companies seeking to improve their business through education, networking, benchmarking and best practices.  For more information, visit www.mheda.org.

Leave a comment

Jungheinrich EFG 2: Best 3-Wheeler on the Market

With plenty of 3-wheel, space compacted designed forklifts out on the market today,  there is no other 3-wheeler like the Jungheinrich EFG 2 series.  When it comes to cost savings and overall efficiency, Junghienrich perfected the bar with their EFG 2 series of electric 3-wheel pneumatic forklifts.


Reasons To Buy a Jungheinrich EFG 2:

DOUBLED SERVICE INTERVALS

The industry standard on performing planned maintenance (PM) intervals is close to every 500 hours.  The EFG 2 series, due to the efficient design from Jungheinrich, has a doubled interval to every 1,000 hours.  That means you will have 50% less downtime, thus saving you on maintenance costs and increased productivity.

EASY SERVICEABILITY

Another great benefit to the EFG 2 is how finely designed it is for service.  While you may have longer service intervals compared to other competitors, but when you do, the component’s are all in easy to access spots.  Jungheinrich designed the forklift with service in mind to help reduce downtime and costs over time.

2 SHIFTS ON 1 CHARGE

Jungheinrich has a focus on energy efficiency with all of their lift trucks and with many products they hold a guaranteed they will run 2 shifts on a 1 battery charge.

The EFG 2 forklift is one of the many products that offer this incredible energy efficiency.  Spend less time changing and recharging batteries during a shift and more time on moving your products.

  • Changing a battery can take up to 30 minutes on average which valuable time wasted during a shift.
  • In addition, you will need fewer batteries to run your fleet which can save space in your warehouse for product storage.

PREMIUM OPERATOR ERGONOMICS AND COMFORT FEATURES:

The EFG 2 series comes standard with some of the top ergonomic features to help your operators with long shifts.  Some of the top features include:

  • Low-Effort electric power steering.
  • No hydraulic components in the leg area to reduce noise and provide more leg room.
  • Ability to tilt and telescope steering column to match operator needs.
  • Essential controls all located on the adjustable armrest, allowing for intuitive control.
  • Solid pneumatic tires and full-suspension seat allowing for the more comfortable ride.

Want to learn more about the Jungheinrich EFG 2 series of electric forklifts?  Contact us at 330-633-6000 for more information!

Leave a comment